 |
Furnaces for continuous heat treatment using conveyor and integral quench tank |
 |
|
Electrically heated or Gas Heated |
|
|
For treating parts in bulk or positioned on the belt, normally weighing up to approx. 0.3 kg or more each, depending on their geometry and the desired result |
|
|
Suitable for high volume processing not requiring frequent changes to the process parameters |
|
|
The range of available furnaces covers outputs from 50 to
1600 kg/hour depending on the type of part and the required treatment |
|
|
These furnaces can easily be incorporated in a full heat treatment line |
|
|
With or without muffle for all mass produced articles |
|
|
Typical treatments |
| |
 |
Austenitizing and martempering in oil, oil up to 200 °C or emulsion |
|
|
Austenitizing and austempering in salt |
|
|
Case hardening (carburising) |
|
|
Carbonitriding |
|
|
Hardening of special steels at up to 1150 °C |
|
|
|
Examples of applications |
| |
|
Mass-produced parts for the automobile industry |
|
|
Screws and bolts |
|
|
Fasteners |
|
|
Bearing components |
|
|
Blanks anchain components |
|
|
Other similar d pressings |
|
|
Drive series produced parts |
|
